Emcod EM200S12DC 200 Watt LED Driver Magnetic Dimmable Single Circuit 120V Input 12V DC Output
EMCOD Indoor/Outdoor Series is a dimmable, magnetic, hard wire power supplies, which can supply 12V or 24V, AC or DC voltage (dependant on model #) to any kind of low voltage fixtures: LED, Halogen, Xenon an so on.
The AC units have a boost tap on the primary side compensates wire drop voltage on a long run and maintains a brightness of your lights. Primary manually reset circuit breaker on all our products is standard. Secondary protection is optional for AC and standard for all DC products.
Two section bobbin provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24.
- Max Total Wattage: 200 Watt
- Single Circuit: 12VDC
- Input Voltage: 120V 60Hz
- Max input current (at full load): 2A
- Output voltage without load: 12.7VDC
- Output voltage fully loaded: 11.5VDC
- Max output current: 16.6A
- Efficiency: 85%
- Input leads: 18AWG 600V
- Output leads: 12AWG 300V
- Dimensions: Height = 8", Width = 4.15", Depth = 3.41"
- Spec Sheet